Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: resistanceDescription: Res Wirewound 27Ω 5% 50W ±15ppm/℃ Aluminum Housed AXL Flange Mount Bag1732 -
![]()
Category: resistanceDescription: Res Wirewound 33KΩ 1% 50W ±15ppm/℃ Aluminum Housed AXL Flange Mount Bag4006 -
![]()
Category: resistanceDescription: Res Wirewound 27Ω 5% 50W ±15ppm/℃ Aluminum Housed AXL Flange Mount Bag9974 -
![]()
Category: resistanceDescription: Res Wirewound 0.47Ω 5% 25W ±15ppm/℃ Aluminum Housed AXL Flange Mount Bag7583 -
![]()
Category: resistanceDescription: Res Wirewound 270Ω 5% 12.5W ±15ppm/℃ Aluminum Housed AXL Flange Mount Bag2953 -
![]()
Category: resistanceDescription: Res Wirewound 1Ω 1% 12.5W ±15ppm/℃ Aluminum Housed AXL Flange Mount Bag7199 -
![]()
Category: resistanceDescription: Res Wirewound 33Ω 5% 12.5W ±15ppm/℃ Aluminum Housed AXL Flange Mount Bag7355 -
![]()
Category: resistanceDescription: Res Thick Film 47KΩ 1% 25W ±150ppm/℃ Molded RDL Lug Flange Mount Bag2664 -
![]()
Category: resistanceDescription: 50W RCH50 These 50W RCH50 series resistors are designed specifically for installation on heat sinks. They can withstand high short-term overloads, are non inductive, and are particularly suitable for high-frequency operation and circuit disconnection. Power at 25 ° C | 50W (with heat sink), 5.5W (without heat sink) --- | --- Resistance tolerance | ± 5% Temperature coefficient | ≤ 1 Ω± 250ppm/° C,>; 1 Ω± 150ppm/° C operating temperature | -55 ° C →+125 ° C thermal resistance | 1.0 ° C/W limit element voltage | 1285V AC overload voltage | 2500V AC (maximum) dielectric withstand voltage | 3.5kV AC insulation resistance | 10000M Ω length | 50mm width | 29.4mm height | 15mm size - Sfernice series| RCH 5 | RCH 10 | RCH 25 | RCH 50 L | 16.6 | 19 | 28 | 50 W | 9 | 11 | 14 | 15.5 H | 16.4 | 20.6 | 27.5 | 29.4 P | 10.2 | 12.7 | 18.3 | 33 F | 11.3 | 14.3 | 18.3 | 39.7 T | 12.5 | 15.9 | 19.8 | 21.4 S | 5.3 | 5 | 7.7 | 8 Ø D | 2.4 | 2.4 | 3.2 | 3.2 | M2 | M2 | M3 | M3 Main Features - Overload Duration| RCH25 | RCH50 | BDS100 | BDS250 1 s | 375W | 750W | 200W | 1500W 2 s | 300W | 600W | 150W | 1250W 5 s | 125W | 250W | 125W | 1000W 10 s | 75W | 150W | 100W | 750W For every one degree increase in ambient temperature above 25 ° C, the allowable overload is reduced by 1%. The main feature table is only applicable to resistors appropriately installed on heat sinks, with a thermal resistance of 1 ° C/W at rated powers of 25 and 50W, 0.7 ° C/W at rated power of 100W, and 0.28 ° C/W at rated power of 250W. This data is only valid when hot oil grease is used and the resistor is correctly tightened by the mounting screw. Tightening torque - RCH25 | RCH50 | BDS100 | BDS250 0.7Nm | 1Nm | 2Nm | 2Nm1433 -
![]()
Category: resistanceDescription: 50W RCH50 These 50W RCH50 series resistors are designed specifically for installation on heat sinks. They can withstand high short-term overloads, are non inductive, and are particularly suitable for high-frequency operation and circuit disconnection. Power at 25 ° C | 50W (with heat sink), 5.5W (without heat sink) --- | --- Resistance tolerance | ± 5% Temperature coefficient | ≤ 1 Ω± 250ppm/° C,>; 1 Ω± 150ppm/° C operating temperature | -55 ° C →+125 ° C thermal resistance | 1.0 ° C/W limit element voltage | 1285V AC overload voltage | 2500V AC (maximum) dielectric withstand voltage | 3.5kV AC insulation resistance | 10000M Ω length | 50mm width | 29.4mm height | 15mm size - Sfernice series| RCH 5 | RCH 10 | RCH 25 | RCH 50 L | 16.6 | 19 | 28 | 50 W | 9 | 11 | 14 | 15.5 H | 16.4 | 20.6 | 27.5 | 29.4 P | 10.2 | 12.7 | 18.3 | 33 F | 11.3 | 14.3 | 18.3 | 39.7 T | 12.5 | 15.9 | 19.8 | 21.4 S | 5.3 | 5 | 7.7 | 8 Ø D | 2.4 | 2.4 | 3.2 | 3.2 | M2 | M2 | M3 | M3 Main Features - Overload Duration| RCH25 | RCH50 | BDS100 | BDS250 1 s | 375W | 750W | 200W | 1500W 2 s | 300W | 600W | 150W | 1250W 5 s | 125W | 250W | 125W | 1000W 10 s | 75W | 150W | 100W | 750W For every one degree increase in ambient temperature above 25 ° C, the allowable overload is reduced by 1%. The main feature table is only applicable to resistors appropriately installed on heat sinks, with a thermal resistance of 1 ° C/W at rated powers of 25 and 50W, 0.7 ° C/W at rated power of 100W, and 0.28 ° C/W at rated power of 250W. This data is only valid when hot oil grease is used and the resistor is correctly tightened by the mounting screw. Tightening torque - RCH25 | RCH50 | BDS100 | BDS250 0.7Nm | 1Nm | 2Nm | 2Nm7350
